Iron - very necessary equipment for home. Therefore, before buying it, you carefully choose a model and manufacturer. Especially the popularity of the brand with teflon coating of the soles. But no matter how firmly there was a base, over time, contamination is formed. Teflon needs special care and it is important to take into account the recommendations on its cleaning.
Teflon coated iron - material features
Teflon is a unique material. It is durable, easily slides according to the material, can smooth it at low heating temperature. But at the same time, teflon coatings are easily deformed when they hit - chips appear.
That is why it is necessary to care for technique with such a layer, it is necessary to carefully and carefully, since it is afraid of any mechanical impact. That is, Teflon can not be rubbed sharp and stiff objects. Otherwise, it is formed scratches that significantly reduce the properties of the ironing.
At the same time, covering persistently to the effects of aggressive chemicals and even acids with alkalis.
How to clean the iron with teflon coating - vinegar and salt
Since this layer is "afraid of" mechanical exposure, the use of salt for traditional iron cleaning is categorically not recommended.
But in a dissolved state of salt together with acetic acid, it will carefully clean the sole of the iron. It is only important not to exceed these proportions when preparing a solution.
To clean you need:
- table vinegar 6%;
- shallow salt;
- capacitance for heating;
- cotton buds;
- soft fabric.
Progress:
- Prepare the solution: Mix one part of vinegar, two parts of water and one part of the salt. Mix well, pour into the container and put on the stove.
- In a weak heat, heat the mixture, but do not bring it to a boil. When salt crystals are completely dissolved, retain the saucepan and give the solo to cool.
- Meanwhile, warm the device, disconnect from the network. When the iron is slightly warm, proceed to cleaning.
- Water the corner of the tissue napkin into the solution and wipe the sole of the iron.
- Pay special attention to severe pollution. If necessary, repeat the procedure.
Important! Do not use metal sponges or brushes with rough bristles to clean. You can damage the surface of Teflon.
- To clean the recesses and steam holes, use cotton sticks.
- One of her end is plunged into the solution and squeeze it slightly. The liquid should not drip from the wool.
- Treat each hole with a wand, for this, scroll it around the axis several times.
- When the holes are completely cleaned, go through it with a dry stick to remove excess moisture.
- At the end of cleaning, wipe the sole with a wet cloth and wipe dry.
How to clean the iron with teflon coating - detergents
It is possible to effectively cope with pollution, if you clean the iron as soon as the dirt was formed.
For easy cleaning, prepare:
- liquid detergent;
- fabric with mild pile;
- capacity.
Process of cleansing:
- In the prepared capacity, add warm water. Pour a small amount of detergent. Stir and well foam.
Important! It is impossible to use for cleaning irons with teflon coating agents with abrasive components or other aggressive components. They can damage the coating.
- Turn on the iron when it gets warm, turn it off and let it cool. Or use the minimum heating power of the apparatus.
- Tissue napkin apply foam on the sole. Lightly wipe and then remove the remnants of the detergent. Paper towels wipe the coating dry.
How to clean the iron with teflon coating - special means
If you are afraid to use the remedies, then use solutions and mixtures to clean the iron with teflon coating. They are designed specifically for special surfaces of household appliances.
Conventional pencils for cleaning irons are not suitable. Therefore, buy a paste for Teflon. Explore the instructions for the means and only then proceed to the procedure.
Prepare:
- cleaning agent;
- used fabric napkin.
How to Clean the sole:
- Make sure the iron is turned off. Pour water remnants from steam tank.
- Turn on the device at the highest temperature or select the "Cotton" feature. Wait until the iron is warmed up.
- Fold the napkin several times and apply a tool for cleaning. Squeeze or pour strictly indicated in the dose of the mixture.
- Follow the material with circular movements. Try to maximize the entire surface of the sole.
- Additionally, flush the tool is not needed. Therefore, after cooling the techniques, check whether all pollution cleared.
How to clean the iron - useful tips
- When ironing synthetic materials, make sure that the iron is in a preheated state for a long time in contact with clothing.
- Gently smooth places on clothes with adhesive applications. At high temperatures, they firmly stick to the sole.
- Do not admit the formation of persistent contaminants, clean the iron timely and often.
Clear iron with teflon sole at home is simply. The main thing is to clearly follow these recommendations and advice, so as not to damage the coverage.
0
2696
