There are situations where the key from the car is missing (stolen or lost) or is in the ignition lock, and the doors are blocked by the central lock. Do not panic. The opening of the automotive door can be made by many ways, the main thing is to be concentrated and follow safety rules.
1
Smash the glass. The way is simple, fast, but absolutely not economical. After all, the insertion of automotive glass - the pleasure is not cheap. At the same time, it is still possible to be injured and the knocked out.
2
Wooden wedge. For this method you will need a wooden wedge up to 25 cm long and a thickness of 3-4 cm, as well as a metal rod with a hook at one end. Carefully remove the edge of the door in the upper corner with the help of the wedge. Carefully drive it with a fist between the frame and the steel of the car, because damage to the door sealant and scratch painting are possible. In the gap, which was formed as a result of climbing the wedge, turn the rod and hook turn the block.
3
Wire hook. This method is applicable to all models of domestic automotive industry. From thin but hard wire (70-80 cm) Bend the hook with a radius of 45 degrees. The length of the hook after bending is about 10 cm. From the door handle, you need to bend the seal and paste the wire. Try to add, and then hook the door craving on which the block button is located. Hooking cravings, pull the hook up. The door must be opened.
4
Electric drill. This method is not always economically beneficial, since as a result you have to replace all the door locks or use different keys, replacing only one. With the help of the electric drill, you can drill the core of the door lock (larva), then the door will open. Another key can notice a metal disc, in shape very similar to it. You can try to use a flat screwdriver or manicure scissors as blank.
5
A piece of wire 1.5-2 meters long. This method is more suitable for imported cars, the principle of the blocking system of which is that when the door handle is opened from the inside, the unlocking of the central lock is triggered. At the end of the wire, which will be entered between the upper corner of the door and the rack, you need to make a small hook. In the deepening of the penetration of the wire, it is necessary to perform oscillatory movements in order to hook the inner door handle of the car. Easy movement up the wire with the knob to open the door opening.
6
Lace or rope. This method is suitable for the car, the internal lock button is located on the top of the door panel and has a protruding form. In the middle of the lace or rope (1 m size), make a loop that can be delayed. But do not tighten it. Shoot the loop between the upper angle and the rack, slightly rendered the corner of the door to the doors. Alternately gently pulling the rope from the loop in one, then in the other side, go down to the level of the door lock and try to put on the loop to the block. Owl, tighten the loop and pull up. Raise the button will open the locked door.
7
Specialist. This method is to appeal to qualified specialists - very common. Even though the challenge of professionals will turn into some amount, it will cost much less than the repair of an incorrectly bent or scratched the door or broken glass. The masters have a special tool and experience, which significantly increases the chances of success in opening a blocked door.
The main thing in getting into a similar situation is not to lose composure. Acquisition of the experience and skills of the opening of the car without a key better spend on their car or in the presence of the owner. After all, the autopsy of an alien car without the knowledge of the owner of the car criminal is punishable.
0
1509
