Russia's largest digital satellite television provider Tricolor TV In order to optimize and improve the operation of its receiving equipment, it periodically provides updates on the receiver, in particular the communication module included in it. These updates are available at a certain period of time in a particular region for specific models of receivers. Follow the ads, and if an update appears for your receiving equipment, follow the following actions.
1
Restart the receiver. Just disconnect it from meals for 10-20 seconds and turn on again. After that, switch to the Infoanal "Tricolor TV" - and a few seconds you will see a message about the ability to update the receiver.
2
Click the "OK" button to start the automatic software update process. First, the system will load the necessary data.
3
Then the firmware itself will begin. It is very important not to turn off the power receiver at this stage, since the failure in the update process carries the risk of complete loss of device performance.
4
Upon completion of the process, the corresponding message appears on the screen and the receiver automatically reboots. If the reboot did not occur automatically, we do it manually, as in clause 1.
5
When you first turn on the receiver with the updated software, it is necessary to re-identify the remote control (click on it the power button on it when the appropriate request appears on the screen). After that, the receiver wizard is automatically started, where we alternately select the language, the operator, configure the antenna to search for channels in the corresponding region. During the channel search, a module update may occur. This process will take a couple of minutes, at this stage it is also important not to turn off the power receiver.
6
After completing the channel settings, check the version on the receiver and the module in the "Status" menu - "On the receiver".
If the software versions coincide with the update announced, then we all have done correctly and the equipment is ready to work.
5
3445
why after the first item when turned on OK. Nothing happens?
why shows STAT on the receiver GS 8300 tricolor TV after the update
on time the update accidentally turned off the power, now the update comes to 70 and is not updated. What to do