The need for editing printed or handwritten information often leads to the need to use the corrector. The consequence of the careless handling of the Belils becomes not too attractive stains not only in their hands, but also on the items of clothing. And if it is enough to wash them enough to clean their hands with soap, but the situation with the tissues is more complicated.
How to wash the corrector - basic rules
- As soon as you spilled blew on the clothes, try as quickly as possible to get into the pollution site with a napkin or paper.
- Do not tritte only the resulting stain. As a result, you not only do not clean the product, but also increase the dirt of pollution.
- Increase the washing efficiency allows preliminary soaking of clothing. Even 10-15 minutes of additional chemical impact on the stain will greatly facilitate its subsequent removal.
- Before using any aggressive agent (including alcohol, solvent), be sure to carry out a small test for the interaction of the material and the selected cleaner. To do this, apply a small amount of substance to a small sector, for example, internal seam.
- To protect yourself from the appearance of ugly divorces and additional spots on clothing, always apply a cleaning agent from the wrong side.
How to Wash Proof - Product Cleaning Methods
The choice of the disposal to the trace of Belil depends largely on their base. It can be water, alcohol or oily (emulsion).
- The easiest way is to clean the water-based magazine. To do this, the stained area should be wetted and grazed by the Brawan Soap. Alternative to the latter can also be familiar powder. Next, the fabric should be lost and leave for 15 to 20 minutes. After - rinse the product. It is important that water is not too hot - about 30 ° C-35 ° C. If you do not have the ability to wash the product, the stain can be removed with a wet matter.
- Traces of a dry corrector (in the form of a roller) are removed as well as spots from white water based. At first, the remains of the ribbon are removed, and after the thing you need to soak and wash away using the household soap.
- It is more difficult to deal with the removal of alcohol and oily spots. The best assistant in the fight against pollution from putty on the alcohol base is ammonia. Prepare the capacity of the required size and pour water temperature into it. Add a small amount of ammonia and mix the components thoroughly. In the resulting breeding, give a cotton swab and processed the evaporated surface. After 10 - 15 minutes, remove your cotton with the product, wash the (with the usual way) and rinse it.
- Other alcohol joints are also help to help cope with the traces of alcohol - denatured alcohol, vodka, tonic or cologne. We carefully wet your cotton disk and tampon with a selected liquid and apply it to the pollution site for 15 minutes. Then the traditional washing of the product follows.
- Traces from smelting on an emulsion basis, perhaps the most difficult. To combat them you need to be stocking with the means dissolving the oil framework of the corrector - acetone (liquid for lacquer removal), solvent (White spirit). The damaged area is processed from the wrong side, ranging from the contour of the stain to the center. In order not to give a spot to spread, put the fragment of matter from the reverse side of the area being processed. After removing pollution, expose the wash product. Remember that the impact of the solvent "poorly tolerate" synthetic materials. In order not to spoil the product, check the action of the aggressive tool on the seams of clothing.
If you do not have the desire to experiment with undergraduates, refer to special compositions to remove putty from clothes. Such means can be found in the same stationery stores as Belil. Apply and delete the tool is necessary in accordance with the instructions on the stain remover.
0
1257
