There are several options, how and where the HDD can be installed. Consider some of them.
1
A regular place to install hard drives is a basket. Winchester takes one seat and fixed with screws.
2
To simplify the installation-removal procedure, the hdd manufacturers upgraded the design of the basket in such a way that inside its drive moved on special sled. Without a screwdriver, do not do and now, but it will only be required once to mount these elements.
3
A number of manufacturers produce a hull with a branded mechanism of a basket that allows you to install hard drives with the simultaneous connection of the required cables without disassembling the case. It is enough to simply fasten the guide rollers to the Winchesteer and put it in the rising or extended container.
4
If the task is to install an additional hard drive in a very old case, it may not be free landing space in the basket. The most simple solution to this problem is to use to accommodate the 5-inch optical drive compartment. Installation is carried out using metal brackets or a special kit, simply providing cooling HDD.
5
Something strange, the transition brackets are in demand in more modern buildings. True, now they serve for mounting at 3.5-inch SSD storage facilities or 2.5-inch hard drives.
6
Connecting hard drives is performed using the appropriate set of cables. The IDE interface has already been outdated long enough, nevertheless the motherboards are still used, the connection to which is possible only with such a loop.
7
More modern drives are equipped with SATA interface. To increase the reliability of the connection and convenience, it makes sense to use a cable with special latches and a connector performed at a right angle.
8
Many models of power supplies are equipped with a limited number of connectors for connecting. If when installing an additional HDD, it lacks the cable of the appropriate type, the problem can be solved by using an adapter.
9
High-performance hard drives, especially multifaceted, are very hot in the process. To ensure their uninterrupted work, you have to use various cooling systems.
10
In order not to increase the overall noise level, devices on heat tubes can be used to reduce the temperature of the hard drive. A similar kit also requires placing in the compartment for optical drives.
11
The same compartment is used and when installing a hard disk in a mobile case. Such a device allows you to work with a drive by fixing it in the removable cover or simply setting it into the extended container.
12
To install HDD or SSD in a laptop, you need to access the appropriate compartment. Depending on the model, sometimes it has to completely remove the lower cover. The drive is usually placed in a casing that can be attached by one or two screws. To connect the required connectors, the disc is required to move in their direction by the guides.
The installation of the hard drive is not a challenging task and does not require special knowledge. In the overwhelming majority of cases, it is enough to have a conventional screwdriver and screw the screws into the places where they were located on the failed drive, or to act by analogy if an additional device is installed.
0
16284
