How to sew a belt?

It's not so difficult to sew something, as it may seem, that's why, before refusing to take a thread and needle and convince everyone that sewing is not for you, you need to try, and most likely make sure that What is really not only interesting to create something independently, but also very useful.

Let's look at today how to sew a wide belt with your own hands. Such a belt will not sweat, and at the same time, the waist will emphasize.

1
Selection of material

Before the typewriter sits down, and start something to wise, you need to determine what material there will be a belt, which it will be color and other no less important sewing subtleties:

Material for such a belt can be any, the main thing is that it is soft enough
The color scheme must be selected according to the wardrobe, that is, navigate in this case, it is necessary on the things that you wear and to which such a belt can come.
It is very important to cut the belt so that it does not lag behind the shape with a narrow and elegant waist.
If in this case you are a novice who never sewed anything, and did not sit behind the sewing machine, it is best to watch the video lessons and master classes on which everything will be shown in detail and described.

2
Belt cutting and other sewing subtleties

In order not to go around and about, immediately proceed to step by step detailed instructions, following which you will succeed, sew a wonderful belt, which will be suitable even for girls with a thin waist:

First you need to decide on all parameters. So, it will take a sufficiently large piece of material more than 100 cm, because the belt will be 90 cm in length. The fabric in this case should lie face to the wizard.
We fold the canvas doubly so that the edge of the tissue is parallel to the bending of the material. The distance from the edge to bend should be 45 cm so that in the amount we need 90 cm.
On the involving side of the tissue, draw the markup of the belt: a length of 45 cm, as mentioned above, the width of the classic belt is usually 8 cm (all this is drawn up with chalk or ordinary soap). With such a markup in the finished form, the belt will be only 3 cm.
Due to the elasticity of the fabric, it will be enough just to give it the desired shape.
Carefully thin and sharp scissors cut out the sketch we made, and as long as I postpon him aside.

To make the belt to give a density, as well as make it to hold the form, the fliesline will be required. One side of such a nonwoven material is punctured, the other is not.
We fold the fliesline in half and reproduce the material according to the example of the exemplary belt. To simplify the process, apply a carved piece of fabric to fliesline and cut it.
We have the material with the invalid side to yourself, on top of it put the flieseline carved earlier and stroke it with a preheated iron. To begin with, it is worth trying such a procedure on one of the ends of the belt, to make sure that the flieslin is glued directly to the tissue, and not to the iron.
Cut the surplus fliesline that could go beyond our belt.
We start the belt in half, and the exhaust to the wrong one.
Now proceed to giving the form of the belt, for this you need to put the belt diagonally to lay the belt to lay from you, bending - to you.
We take a belt with one hand, and far enough from the beginning of the pattern, and we begin to stretch the slice of the belt and start it bending, it turns out that the belt will become more, and the bending is to decrease.
In order for the belt not to move away from the body, it is necessary to pave an extra line on the bending of the belt so that it is reduced in volume.

While the bend is tightened with a thread, it is necessary to fly well again, the more loose fabric, the easier it will be suwayn (first we are in the wrong side).
We start taking the belt to fitting.

This is so easy to sew a belt, which is perfect, both for shorts and trousers, and will sit perfectly, keeping behind the body, and at the same time, giving the figure even more sophisticated look.