How to sew a lambreken?

The simplest lambrequin, which can be sewed, in the form of the arch. Such a lambrequin is perfect for the kitchen.

1
Picture of lambrequen

Dimensions:

On the cornice - 2 meters.
Height - 1 meter 70 centimeters.
Size in the middle - 1 meter 10 centimeters.

First make the pattern. For such a lambrequin simple cut, it is important to choose a beautiful finish, for example, glass cutter from beads. Since we have a 2 meter cornice, cut 4.10 - a double increase, and 10 centimeters for processing on the sides.

We take the fabric, measure 4.10, put a notch and go to cut into a large area (for example, on the floor).
On the edge, the fabric fold two times so that there is a symmetrical arch.
Cut the side size (1. 70).
Folded twice the fabric by measuring tape measure (1.10).
From this point (1.10) draw a smooth line with the reinforcement of Niza.
The latter will be 50 centimeters, the side part is 1.70.
You can pre-draw the shape of the arch or cut to the eye.

2
Treatment of slices

Before you process the oblique cut, you need to process straight sutures on the sides (side seams) and sew the braid.
After you sewed the bracket and processed the side seams, lay the "Moscow seam" on the oblique part of the product.
Tighten the top thread slightly (literally on one division) so that it takes place.
Then reduce the size of the line (slightly needed to reduce it to be smaller). It is necessary that the product in the processing process is not pulled out.
Stop the first layer to the end, not in a hurry.
After lagging the first seam, cut all extra threads.

3
How to watch the oblique cut?

Plug seam.
In a straight piece, iron, as usual, and where the oblique slice, iron in this way - do not lead the iron there, and apply and remove the iron.
By oblique seam, you need to make two weems - after the first overlay of the seam, and then - after the second.

4
Sending trim

After weeping, we put another seam.
Gently bend and, literally on a centimeter, we grasp the seam to be thin.
After that, make a complete iron.
After you have been rejuvenated, your product is ready, the latest operation is the sewing of the finish (for example, ribbons with beads or glassware).
Send the furniture to the "Moscow seam".
Subsequently, if you want to change the finish, it will be possible to fracture and sew something else.
Before starting to scribble, you need to weaken the thread tension before the level, which was before, and the width of the stitch also until the previous level.

Now you can slightly under the finishes from the wrong side and drape the lambrene. The form of the arch is ideal for kitchens, especially in cases where the windowsill is used.