How to make a piece of kunay

How to make a piece of kunay

Kunai is a three-way Japanese dagger, the prototype of which is the ordinary construction blade-Kelma. At the current young generation, Kunai is associated with a non-resistant ninja, a man dressed in a black suit and a mask who can quickly run, masterfully climb on the sheer walls and make enemies, dissolving in the air. If your child is a fan of this brave hero - a character of many cartoons, make kunai or cardboard for children's games.



1
How to make a paper kunay - the features of the knife

Before making the dagger, let's figure it out from which parts it consists of which is made and how is used.

  • In the form of Kunai resembles a fish with a round head (ring for fingers or rope) and a sharp tail-blade.
  • The length of the blade varies from 10 to 67 centimeters, and the tip is sharpened only on the one hand.
  • Kunai in ancient Japan was used to maintain a melee, now - for rock climbing and cooking on hiking conditions.
  • The knife is a few species: big, small, volatile. We will disassemble how to make a small type of weapon having in the present form about 25 cm.



2
How to make some kunai paper in the cutting technology?

The way is simple, if you do not hurry and delve into the essence of the case.

Materials:

  • Colored paper, format - A4
  • Scissors
  • Glue
  • Pencil

Work on the steps:

  • Fold with black paper in half through the narrow side twice. Expand the workpiece, put it in front of it in height and wrap the top corners to the center.

  • Turn the detail to the sharp corner to yourself and start the wings again by the type of children's bird-tick. Corners of the tail also wrap.

  • Starting from hot spout, turn both edges to Hells so that they get close to each other. Protect your seam, lock the scotch and postpone the blade.

  • Lubricate white paper sheet over long edge glue. On the opposite side, turn the paper on the pencil, glue it with a tube, then push the pencil with a culinary skewer out - it is Ephesus.

  • Purp the blade through the hole at the bottom of the part and insert the prepared stick-Ephesis into it, pre-lubricating the inserted part of the glue.

  • Cut the rectangle from black paper, the size is 10 x 15 cm. Lubricate glue to its short side, capturing about one centimeter. Screw a piece of pencil, remove (both in the first case) and dug your fingers, forming a ring for fastening the rope to the Ephesus.

  • Spread the tips of the ring, connected together and insert them into a white tube.

  • Cut from orange paper two strips - 2 x 30 cm and connect them in the middle of the scotch. Wrap a tape (braziness) a white tube, lubricating the beginning of the beginning and the end of the ribbon. All - the work is done, Paper Kunai is ready.

3
How to make from the paper Kunai in the style of origami?

Fold the knife in the origami technique will have to be scrupulously, but the result will please you.

It will take:

  • Two squares of black paper - one - 20 by 20 cm, the second - 15 to 15 cm
  • Rule, pencil
  • Scotch, scissors

Started:

  • Blade. Take a smaller square, bend it in half diagonally, then - on the middle line and deploy. Before you, a triangle with trace of bend.
  • Side Side Bend to the middle and wrap the paper residue around a narrow triangle. Bottom bakes hide in the billet.
  • Remember the blade by pressing the details on the opposite sides.

  • Lever. Roll from the second square tube, glue it with scotch, so as not to unfold. Stick the handle into the knife hole.
  • Silent the bottom of the tube, turn the ring, lock the adhesive tape. In the middle of the tip of the coin for weighting to kuanai flew better.
  • Seal a tip strong tape.

As you can see, make kunai from paper is easy. But if something has not happened, see the video below, disassemble your mistakes and complete the work on the cradle.

Add a comment

Your e-mail will not be published. Required fields are marked *

close