How to make santa frost from bottle

We offer to adjust the traditional drink of the new year, a bottle of champagne! The resulting Santa Claus will be an excellent gift for loved ones and friends, and will also be an original souvenir on the New Year's table.

1
How to make Santa Claus from a bottle of champagne

For the manufacture of a frost grandfather, we need: a small piece of red felt, white fur, openwork braid, 3 large red rhinestones, artificial hair, scissors, thread with needle, glue gun and thermo glue in a tube.

First of all, it is necessary to carve out the lower part of the outfit, for this attach material to the bottle and mark up to the place where the form begins to narrow.
If a bottle of standard shape should be 11.5 cm. The width of the material, and the length is 28 cm + 1 cm add to the allowance. Cut the resulting cut of the fabric.
Slide the thermo-glue two edges together and dress on the bottle.
We rebuff the upper part - to do this, attach felt to the bottle in the backstage, depicting the neck of Santa Claus. (Fig.4) Make measurements with a simple pencil. To determine the length, measure the girth of the bottle, plus the allowance of 1 cm. Make the height measurements before the edge of the lower part, do not forget to leave 1 cm of the allowance.

Based on the measurements, draw the item on the material, then cut on the outlined lines. For the edges to get marshock, cut the tips of the fabric (Fig. 5). After cutting out the upper part, glue the edges together, not about 1 cm.
Put the top item on the bottle and disconnect the bottom, then connect the two parts with a glue gun. For durable fastening of the material slightly pressed for about 3 seconds when gluing parts.
To close the central and side seams, use a white braid. Clean it with a glue gun on all open seams of material.
After you decorate the outfit, continue to decorate with white fur. Spend measurements, and cut the desired amount of material.
First glue the front of the fur, then output the bottom items and reward Santa Claus with a beautiful white collar. Complete the manufacture of the dress with gluing three rhinestones on the front of the fur.

Go to the second part of the work, we make a hat for Santa Claus. To do this, cut a rectangle from the fetra with a size of 14/5 cm and a circle with a diameter of 5 cm (Fig. 9).
First, go into the manual two edges of the rectangle, then to the resulting cylinder, the circle from the felt.
Remove the resulting cap on the front side and glue the white fur on the bottom.
Optionally, you can glue the beard to the header. To do this, make the basis of a white felt, in the form of a month and glue the beard on it. The tips of the resulting beard attach to the header and press tightly.
Finish the image, dressing the cap on the bottle. Our Santa Claus is ready!

2
How to make Santa Claus from a bottle in the technology of Kazan

The popular appliances of Kazan has become fashionable to decorate the table serving, decorating glasses and bottles with beautiful satin ribbons. Let's decorate the New Year's Bottle in the style of Kazan. To work, we will need: a bottle of champagne, satin ribbon 1 cm wide, white paper A4 paper, red beads, white fur or sintepon, glue and scissors.

First we make the foundation for attaching the tapes, for this cut 2 rectangles with dimensions - 14/30 and 8/30 cm. Sample the cut parts on the bottle and glue. For density, top at the angle, glue the napkin. Cut all overcoats. The resulting base should be freely removed and dress on the bottle.
Glue tapes. The hardest part of the work is the fastening of the first ribbon, the backstage must be clearly in the center. Purley the bottle with ribbons to the end. Work does not hurry, try to use the most smooth tension, for this hand hold the material on one side of the bottle, and stick the ribbon with the other hand.
Go to the removable header of the grandfather - cut the rectangle from the paper and glue the edges, the cylinder should turn out to be a diameter of 5 cm. Cut a separate circle and close the cylinder.
As soon as the frame is made, you can proceed to decorating the caps. Tapes wrap the cap, the bottom of the cylinder swipe with pieces.
It remains to decorate the bottle - cut the necessary strips of fur in size and complement the outfit with a large collar, fluffy bottom and front rolling. At the end of the work left to glue beads on the front side. Santa Claus is ready!