The problems of burnt fabrics to the iron arise due to improper operation of the device. Before working with the iron, you need to get acquainted with the instruction. The fabric will stick to the sole of the iron after incorrectly selected fabric to the temperature. Dark spots can be removed, it is only worth understanding the types of assistants. In practice, this task is not very complicated and consists of several simple actions.
How to Clean Iron from Tissue Fabric - Pencil from Nagara
Small in size, the pencil is spent quickly, but perfectly copes with difficulty. When working with a pencil for cleaning the iron, it is necessary to air the room. Couples formed from the heating of a pencil are dangerous to human health. The current composition : Ammonium nitrate, adipic acid, citric acid. Under the iron is lined. Iron is heated, pencil sketch burned places. All Gar slides on a rag. The remains are thoroughly wiping the same rag. 
How to clean the iron from the burnt cloth soda
The food soda interfere with water to the state of the paste and applies to the cold surface of the iron with a cloth. The process is repeated until the iron is cleaned. 
How to clean the iron from the burnt fabric by vinegar
- During operation, the room is ventilated. Capture a clean cotton rag and a bowl with vinegar. Attention! It is necessary to work in gloves, as vinegar, when you get into the sections, it can cause burns. The iron is heated to a minimum temperature ("Silk" mode) and wipe the surface with a cloth wound on a solid oblong item until all dirt and burned tissue residues come down.
- You can also leave a cooled heating device in containers with vinegar. After 30 minutes. Inspect the result, wipe the surface dry, avoiding vinegar to the skin. Turn on the iron and try the unnecessary cloth until complete cleaning.
How to clean the iron from the burnt cloth paraffin
The usual paraffin candle is suitable without impurities. The candle wrap in cotton rags and spend hot iron in pollution places. Paraffin together with mud will flock, so under the iron is put a newspaper or a large piece of unnecessary fabric. After the process is completed, the paraffin from the sole should be completely removed. If the steam mode works on the iron, the water is gained and removed by a hot steam nozzle. Next, they stroke the pure cloth until the surface is completely cleansing so that in the future it does not spoil the clothes with the remains of wax. 
How to clean the iron from the burnt fabric salt
- The tablespoon of salt is poured on the fabric and smoothes with a heated iron. The pair function is turned off during the process. The sole is pressed rigorously, with time, the salt should take the entire nagar, as a result, it turns out a clean, shining surface.
- In the cotton fabric, several spoons of kitchen salt are added. The fabric turns into a tightly shaped bag. The iron is heated, with the help of a bag with circular movements, the remains of burnt fabric are wiped.
How to clean the iron from the burnt fabric foil
Very light, but rarely used option, since few people know about him. The iron is heated and is conducted along a dense aluminum foil, as in conventional fabric. Nagar moves to foil, freeing the sole of the iron. 
How to clean the iron from the burnt fabric soap
Working with the household soap is quite simple. For this, the hot iron is rubbed Bru. Nagar is cleaned with a wooden scraper and cotton cloth. 
How to clean the teflon iron from the burnt fabric
You should be careful in operation with teflon coating. The material is gentle, not even the finest tissue, it requires special care. Teflon is often contaminated by poor-quality water in steam use mode, when working with synthetic tissues, resins and plastic. Such an iron can in no way try to clean with metal sponges, sandpaper. Cleaning occurs with cotton chopsticks, which remove dirt from the steam holes.
Cotton discs or tampons are needed for soft applying hydrogen peroxide. There are also special scrapers for the surface of the iron. They are made from Teflon, the work is to warm the surface to the highest temperatures possible on the iron, and the scraper scraper by this scraper. The most effective way on the extensive area of \u200b\u200bdamage.
To prevent problems in ironing, you need to follow the instructions. Each material has its own features. Fabrics are sold on the market, which are better to iron at low temperatures, or work through gauze. You can not leave the hot iron in a horizontal position for a long time, since the sole will light up the fabric, it will spoil not only the mood, but also two surfaces: iron and ironing board.
0
1165
