An integral attribute of the new year is a fluffy green beauty - Christmas tree. And it does not matter if the real tree could not be installed. A neat tree created by your own hands will definitely bring a good mood to the house, and with it a feeling of a holiday and magic. And how to prepare a New Year's Beauty with Mishura, read further.
Preparing a Christmas tree of soft tinsel
Prepare materials:
- tight paper sheet (the format depends on the desired christmas sizes, but not less than A4);
- glue;
- scotch;
- mishur green (preferably) colors;
- candy and other decorations.
Stages of preparation of the Christmas tree:
- The preparation of forest beauty begins with the design of the cone-shaped base. To do this, turn the paper sheet appropriately. Forming a cone, leave a small hole in the area of \u200b\u200bits vertex - through it it will be necessary to skip one end of the tinsel. Connecting seams rinse with glue. For greater reliability, the joint line can be shattered with scotch. The bottom edge of the cone is cutting to the sustainable base.
- Now the Mishura turn came. One end to her end in the hole of the cone vertex. Using glue or tape lock this tip from the inside of the paper base.
- Next, it is necessary to wrap the Mishur cone, stepped by the resulting base. For a more reliable mounting of tinsel, a paper blank must be lubricated with glue. To fix the "rain", it is enough to make a few vertical adhesive strips from the top and to the base, the entire surface of the cone can not cover glue.
- The second end of tinsel can be glued at the base of the Christmas tree or to start the last round and also glue.
- Now it's time for decorating crafts with sweets, small toys and rain, only your fantasy can be restricted. The only condition - the decorations should be light.
Preparation of Christmas Tree Frame
For the preparation of the crafts according to this scheme, tinsel will need a wire inside. A similar design of the decoration allows not only to decorate the products, but also to form curly decorations.
Prepare materials:
- thin tinsel with wire frame in the middle of green (additional colors can be used to decorate the Christmas tree);
- fogence of foam - base composition;
- wooden stick - rod of the Christmas tree;
- small ornaments - toys, beads, balls;
- scissors;
- glue.
Stages of preparation of the Christmas tree:
- Give foam in the form. Pay attention to the size of this "pancake" - if the base is too small, the Christmas tree will be unstable. In the center of the foundation, install a wooden skewer.
- Cutting green tinsel strips of different lengths - longer cuts will form the lower tiers of the Christmas tree, shorter - located towards the top. If it is difficult for you to immediately navigate, what length cuts to prepare, cut all the strips the same. In the future, we will pruning the finished tree.
- Fixation of branches on a wooden basis is produced by forming 2-3 turns around the shrinkage. For greater reliability, you can add a drop of glue. Thus, form a crown of wood. The top of the Christmas tree is tired separately, carefully hiding the ends of tinsel.
- So that the Christmas tree turned out more fluffy and natural, add shorter branches selectively to the twigs.
- Decorate spruce.
0
285
