Red currant is a berry bush that requires proper attention from the gardener, because without him good harvest will not work. Let's talk today about how to put red currants correctly and what the gardener should know about this process.
Nuances landing red currant
Immediately I want to say that it is necessary to plant red currants in early spring, and even more precisely, immediately after the snow comes down from the ground. Some gardeners are confident that the optimal time for planting such a bush is the autumn period, but most often, it fails at this time to carry out the conceived (harvest, epippering plantations, etc.). You must also understand that the first harvest you will receive after a couple of seasons after landing.
First of all, you need to do the selection of places for landing. Here you should not choose only on the basis of the criterion "where there is a place." It is necessary to approach this question with complete seriousness, because a lot of things depends on the landing site, so keep in mind.
The bushes of red currant is best to plant in a place where there are no special winds (in the flood, as they say). Among other things, the place where you are going to plant this bush should be well covered and heated by sunlight, it is better not to plant currant in the shade.
Do not grow red currants on soils, in which a fairly high level of groundwater, because the root system of the berry bush is simply disappeared. The soil for planting a bush need to choose fertile, but preventing landing in a wetland, because it will just be a waste of your time and strength, and the bush will die or simply will not give a harvest, in principle.
The process of planting red currant
After you have chosen a place to plant a berry bush, go to the direct planting process:
- First dig a hole whose parameters will be as follows - the width of centimeters 50, the depth is 40 cm.
- Now it will be necessary to lay out the nutrients on the bottom of the yammer (usually mixed with the usual fertile soil).
- Now it's time to pour ordinary flow water there, in one pit you need to pour at least 10 liters.
- The next stage - to a moisturized and fertilized pit we put a bush, and then we throw it the earth and fill with water again.
- The main rule in this process is not to damage the root currant system.
- The planting of the bush should be carried out in such a way that the neck of the root over the surface of the soil was at an altitude of 7 cm.
When you planted a bush, it does not mean that this support should be completed. The planted plant needs to be careful, and, to do it will need throughout the summer period:
- plant requires regular irrigation
- in mandatory, you need to spawn weeds under the bush
- grind the earth every week
Red Currant Transplanting Process
The currant bush will be well fruit for 10 years, even if you won't remember it, but despite this, it will be better to take care of the spring to transplant a bush to a new place. In this case, we are not talking about old bushes (let them remain in the same place once again, they do not need them), but about young few shoots that they ask for a new place to "live" a complete life.
Before digging out new processes and replant, you need to dig a hole for a start, put the fertilizer to pour water there, and while it is soaked in the ground, you can start digging a new bush.
It is also worth paying attention to the fact that it is necessary to pour fresh manure into the dug hole, as well as ash, because such a type of fertilizer met is simply burning the root system of the bush, which will lead to his death, and in a short time.
After you put a bush of red currant, you need to cut it immediately. To do this, we cut off the secret, leaving only a few kidneys on each of the twins of fresh young bush.
When you do this kind of trimming, all the forces of the plant will go to the development of the root system and, accordingly, on the growing season, which will be favorable on the results of the future generous harvest.
Shining bush
Red currant is a fairly popular plant in our areas, therefore, it is quite unreasonable that it is often quite common to arise about how to glorify such a culture correctly, and what you need to know.
It should be immediately noted that the process in question is enough to simply implement, so it should not think that you will need a huge cost of strength and time for the drawing, it's not. The process of shilling in the spring period is as follows:
- We inspect each bush that grows on your plantation, after which we are determined with the variety that you get out to "reproduce" by shifting.
- Here you only have only shoots on which enough development and large kidneys have grown. It is clear that this process is carried out before the kidneys on the bush begin to bloom.
- Cut the selected branches, carefully and not rushing. You need to choose the branches carefully and make sure that they are not sick and not deformed.
- Now planted cut branches in the ground. Do it better in the already size and so that it is fertile.
- It should be noted that in the soil inserted a branch at a right angle, and the distance between the cut-off seedlings must be more than 14 cm.
If you want cuttings to develop more actively, you can apply growth accelerator.
It's simple, if you know exactly how it is done.
0
9026
