How to connect the compressor from the refrigerator

When an urgently needed a compressor, you can take this device from the old refrigerator. In order to adapt it to business, you need to take care of the correct connection, in this case the stability and service life will increase.

When the compressor is removed from the refrigerator, accumulating should be accurate to keep the oil available in it. The cable that leads to the temperature sensor is cut, the resistance is measured and the location of closed contacts is studied, which will be required when assembling the circuit. Turn on the compressor to make sure its performance. Determine the location of the exit, in the future there will be an oil filter installation.

To protect the compressor from overheating and breakage, install a good relay. It is important to know the brand of the refrigerator and take the relay from a similar device. Carefully examine the scheme and connect in the same manner as in the refrigerator. If the documentation for this device is lost, the electrical circuit can be viewed here .

We equip the device with the receiver, acquiring it in the store, or we make it yourself. For the assembly, a plastic bottle will be required, in the lid of which two holes need to be made and insert the input and output tube there. Further pour epoxy resin into the bottle and turn it over. The resin will soon freeze, and the lid with tubes will forever stick to the bottle.

Compressor connection with the desired device occurs with hoses wasmemenYou can find them in the automotive store. It should be carefully observed over the oil level to avoid overheating, and the unit's time does not exceed 45 minutes.

When working with electrical devices, security safety techniques should be followed. Carefully check whether the wires are exhausted, and the connection is carried out only with dry hands. It is also not necessary to place high hopes on the homemade compressor, because no one will give a guarantee for its long efficiency. So if there is an opportunity, it's easier to buy a new one.