How to translate the door of the refrigerator

In the standard models of refrigerators, the door opens on the right side, but some manufacturers provide structural features that allow you to move the door cloth on the opposite direction. This makes it possible to make a model ergonomic and comfortable for use. Do such manipulations can be independently, having an elementary set of tools.

Situations requiring door outweight to the other side:

The activity of the left, and not the right hand - a weighty reason for outresting.
Choosing a model, we draw attention to technical features, dimensions, ease of use, but forget that space is needed for the sash.
Rearrangement in the kitchen associated with the repair or installation of washing, washing machine.

Idea implement out of the door of the refrigerator Manufacturers had recently. Better doors are replaced in models with two cameras. It is more difficult to make such a single-chamber representatives, you have to simultaneously outweigh the freezer door. Uncomfortable when installing convex handles. There is an opinion that when moving, a loosely closing door is corrected, but the probability of this is minimal. More often the cause becomes spoiled gum. It should be replaced to get rid of the problem. If the problem is in deformation or broken mounts, then the outbuilding helps.

Refrigerator Door Operation Uncomplicated. All that is needed - flat screwdriver and wrench. Fastening elements on various models are different, and the size of the tools is selected. It also does not hurt ordinary scotch. Before starting work, de-energize the refrigerator and remove the products and shelves. The doors themselves are voluminous, heavy, but fragile, which can lead to their damage. Perform work gloved. Two-chamber refrigerators are attached to three brackets. One is installed on top, the second - in the interval between the doors, the third - bottom.

First make sure it is available on the reverse side of the plugs and swivel loops. Details for fastening are available in the configuration. If not, buy them by the firm. Work process:

With a screwdriver we remove the plugs from the bolts, disconnect the mount. So that the bottom loop is not deformed, after disconnecting the attachment it should be kept.
Before removing the door, lock it with scotch. Thanks to this simple procedure, the door will not break open and will not fall into the midst of the process.
On the middle bracket, the mechanism of the axis of rotation is established. Carefully get it.
Remove the bolts on the middle bracket. After removing it, disconnect the door below.
Remove the last bracket and install it mirror from the opposite side into the available holes. If there are stub bolts, install them on the vacant place.
Next, change the handles. They are attached screws. Often the fastener mechanism is hidden by a stub. Carefully find it with an acute subject or miniature scolding. Be extremely careful, because the handles are made of plastic, applying excessive power when screwing down - you can deform the material.
Move the mirror on the other side of the stopper (metal parts located from the ends, which prevent strong shocking of the doors).
Set the reverse order all parts on the other side. Brackets secure conscience, it is they who hold the entire weight of the doors with products.
If necessary, move the open door sensor.

For models with an electronic scoreboard, it is better to invite professionals, because you will have to move the display cable, and it is difficult. If the doors rearrange incorrectly, they will skip the warm air, and the compressor will start more intensively, in the end there will be a breakdown. To avoid this, after installing the refrigerator slightly tilt the back - and the door will start tightly close. If the refrigerator is under warranty, remember your intervention will cancel it.

Before starting work, make sure that the materials and tools are available, and after the installation is completed, the door closing density is scrupulously adjust. Various models have many nuances, so initially learn the instructions.