Owners of private houses and household sites are often faced with such a problem as a lawn haircut. After all, making grass must be done more than once per season. Thus, the lawn will always look presentable.
Many gardeners have not yet used a classic braid to solve such tasks. Actual and convenient adaptation is a benzocos or electrical scan. They work on the principle of the line rotating on large revolutions. Over time, this element is wearing and shall be replaced. And then the question arises: "How to wind the fishing line on the benzokos with your own hands?".
How to wind the fishing line on the benzokos
- First you need to determine which diameter of the fishing line is your trimmer or braids. It can vary within 1.2-4 mm. Typically, the diameter indicates a passport for the technique, and the power is greater, the topics should be thicker. It should be selected individually, considering the model and the parameters of the braid. The fishing line is also characterized by a sequence character that can have a round shape (for simple grass), square (for the soft view of herbs), to be with sharp edges (for high and thick herbs) or with notches.
- Coils on various models have differences in fishing systems. They are divided into manual type, semi-automatic or automatic. This indicator is important, since it depends on the way of winding the fishing line.
- First of all, you need to open the cover on the bobbin and see what carving. With a left-sided cheating, it should be rotated not in the usual order, but clockwise.
- To fill the coil, you should prepare at least 5 meters of fishing line, which is folded in half, and the center is inserted into the place allotted for it.
- Next, the fishing line is wound in the direction of the arrow, which is usually depicted on the body of the coil.
- One hand needs to hold the edge of the line, and the other rotate the bobbin, carrying out winding. When it remains 10-15 cm, you must fix the edges in the slot.
- Next, the fishing line is taking into holes on the body of the coil. At the same time, it must be extended to exclude the formation of loops inside, and insert a bobble in the coil.
- Finally will only be able to assemble a moselive coil.
Check on the assembly
- It is often found coils that have a special design when when assembling the edge of the fishing line, it is necessary to free it from the holes. And to check how correctly the head of the garden inventory is assembled, you need to slightly push the trimmer about the Earth.
- Then you should click the button and simultaneously pull out the edges of the fishing line.
- If as a result of the mustache stretched slightly, it says about the correct change of the fishing line and the right installation.
If in the process of replacing the fishing line comply with these recommendations, benzocos or trimmer will be trouble free in work, and the lawn will always delight the eye.
0
513
