The unchanged attribute of rest at the cottage is a bench on which you can stay and relax after the garden everyday life. A comfortable shop is easy to make from the profile tube and get durable, and abundant (portable), not costly product for financial investments. Let's deal with how the usual bench is made.
Bench from the profile pipe - Help
Before proceeding with the workflow, remember what profile tube is.
Profile - metal pipe square, rectangular or oval shape. Profile is made mainly of steel, and used when creating frame structures.
Recreation bench
If you have little time for creativity, make a bench without a back. It is done elementary: a metal box is welded, on which wooden planks are attached.
You will need:
- Profile pipe (8 m) section - 30 x 30 mm
- Woody rails (8 pcs.) 6 cm wide
- Nuts and bolts with flat hats - 16 pieces
- Roulette, welding machine, Bulgarian, drill, paint and brush
Begin:
- Cut from the profile with a grinder for long supports - 6 blanks of 60 cm, for short - as much, but 45 cm, for a seat border - two 2.3 m.
- Cook the backbone bench, welding legs so that they are located to a rectangular basis at right angles. Clean the seams and boot.
- Drill holes in steel supports to fasten the seats on them and paint the core into the dark color. Reiki are impregnate with varnish, let dry and secure, using a set of hardware.
The shop is ready - put it in a quiet corner of the household territory and relax, enjoying the purity of the air and singing the birds.
Profile Pipe Bench - Complete Design
Before you, the lavetie scheme with a back, and we will learn to do.
For the basis of the bench, it will take about 10 meters of profile by a cross section of 30 x 30 mm, from which you need to cut:
- Coast - 155 cm
- Segments for a base of 350 mm long, front supports - 390 mm, parts of the mount - 20 mm (2 pieces of each element)
- Bent backbone intervals (2 pcs.) - 100 x 780 mm
- Heels - 40 x 40 mm (4 pcs.)
- Two connector for supports Length - 450 mm
The creation of the seat will go:
- Backrest boards (3 pcs.) - 25 x 60 x 1600 mm
- Reiki for the bottom - (3 pcs.) - 30 x 60 x 1600 mm
- Nuts and bolts with a round head - 25 pieces
The remaining materials are the same as in the previous paragraph.
Start:
- Connect the crossbar and two pieces of 350 mm, then breed bent items.
- To the released device, weld the front support fragments that strengthen tubes with a transverse crossbar.
- Attach the arcuate pipes between the supports and the caps on the legs.
- Further, as in the first case, go stick, scribble, paint.
- Fix the scraped boards on the back and seat with the help of self-tapping and - the work is completed.
So, you understood how the bench is done, it means that it is time to connect fantasy and build a shop that shakes his uniqueness of relatives, friends and curious neighbors.
361
