Each woman loves shoes. Many fashion guards have up to five, or even more, pairs of boots that need to hide somewhere. Furniture stores offer ready-made shoe shelves, but they are often expensive and require special space. The correct organization of shoes does not mean that you need to spend a whole condition or have a closet size with a small house. There are many things that can be turned into shoe organizers. They look great and very effective for storage. The proposed shelf is very compact and can serve as a bench for lacing shoes or pulling boots.
Materials:
- a piece of thick plywood
- wooden dowels
- 4 furniture rollers,
- self-tapping screw
- drill,
- roulette,
- slice of sandpaper
- grinding unit
- a circular saw.
Such a regiment can be built according to its number of shoes and the required space. If necessary, it can be inserted under the staircase or arrange directly at the entrance door.
Measure dimensions
For starters, measure the room where the wooden shelf will be located. Then count the size of the longest pair of shoes to get the desired depth. Finally, measure the highest pair of boots to get the height.
Follow the correct Faneru
After all the measurements are ready, mark the length and depth on the sheet of plywood. Cut the two boards of the desired size using a circular saw. Then pass the rough edges.
Height of dowels
Mark the height of the highest pair of boots on a wooden dowel and blank four equal parts.
Distance between the shelves
Cut the upper, lower and highest dowels for the inside of the shelf. If you want to place inside the rack shoes with heels, sneakers or sandals, measure the size of the heel. Thus, you will get the height and length of the inner shelf, which will allow high boots on its sides.
Number of blanks
Prepare according to the selected two of the same size (upper and lower) shelf 2 secondary strap (one 50 cm larger than the other) and four dowels certain height. On the minor shelf can be stored flat shoes and flip-flops. At this point you should have: two long shelves with four high dowels, one middle shelf with four anchors of medium height and a little shelf with four short dowels.
Connect the workpiece
Pre-drill holes at both ends of each dowel and the four corners of each board. Next, connect the boards with screws and dowels, since the inner parts and ending with the highest rods and long boards.
Shoe organizer prepared
The last stage of a shoe organizer assembly is securing wheels on its bottom. Turn your rack and fill her shoes. Upper shelf can serve as storage space for small bags, hats or umbrellas. At the request of the organizer can be painted or wallpapered.
When creating your design, keep in mind that you do not need to strictly follow the given configuration. You can make your shelf is wider or higher, if you plan to sit on it. On the Internet, a plurality of simple ideas for organizing your shoes, we need only to aim and a little effort.
352
