The meaning of light is very difficult to overestimate in the dark, as this directly affects the safety of movement along the road as your car and the cars of other road users. Unfortunately, the situation is often not found when car owners do not pay coverage of due attention and such behavior leads to the consequences, the cost of which is many times higher than the cost of a replacement light bulb. In fact, in the process of replacement there is nothing complicated, you only need a few minutes of free time. Let's analyze the whole process on the items.
How to replace Middle Light Bulb - Removing the Light Bulb
Middle light headlights are in front of the car and, depending on the body's design, can be both a separate element and a combined light light. To remove the light bulb from the headlight, you need to make a specific set of actions:
- To begin with, remove the rubber seal, which closes it from exposure to an external environment.
- After that, we will be able to see the lamp that keeps Lama in the spotlight, usually it is made in the form of a fixed latch on one side of the latch to which you just need to press.
- Next, you should turn off the plug connector from the lamp, it is necessary to do it carefully so as not to damage the wires. In no case do not need to pull them, everything should be removed easily.
- After performing these procedures, we will have a disconnected light bulb, which can be removed. It is not recommended to touch the lamp with hands behind the glass in order to avoid damage, especially if it is also installed back to the headlight.
How to Replace Middle Light Bulb - Definition Type Lamp
After the lamp is extracted and we want to replace it, we need to determine the type of base, which it has. The most common types of bases in the Middle Lights of the car are H1 and H7, if the lamp has two threads to the close and far light, then its base will most likely be H4. There are other options to understand them bring pictures of their popular species. The type of base must be taken into account when you are going to buy new lamps in the store instead of the old, the base of different types of lamps are incompatible, it simply will not fit into the plug connector. What type of lamp is installed without removing it can be in the manual to the car, this information is usually indicated on a page with a set of technical characteristics.
How to replace Middle Light Bulb - installation process
The lamp installation process is similar to it, only actions must be performed in the reverse order.
- To begin with, we need to connect the plug connector to the base of the lamp, then neatly, without touching the glass of the fingers and parts of the car, insert it into the landing place in the spotlight.
- After that, you need to fix it in the landing location using the latch (in some models of the auto seat itself is a latch itself and it is not necessary to fix anything) and close the rubber seal.
- Next, you need to turn on the ignition and check the performance of the installed lamps. For many modern machines, lowlights of the headlights can only be included with the engine running, pay attention to it when checking.
I would like to note that during the replacement of the lamp you need to pay special attention to its power consumed. In some cases, the lamp is allowed to the more powerful, but most often it is unacceptable, since it creates an increased load on the wiring and can lead to its failure (burden). Also due to elevated lamp temperatures, it is possible to reflect the reflecting elements of the headlamp unit and its breakdown.
Faulty light on a poorly illuminated road can cause an accident and automatically, even if you are right, makes you the culprit of an accident. The lighting system needs constant and careful control, especially as you see, care for it is not practically no difficulty, especially compared with the consequences of a possible incident that occurred in its fault. So keep this important knot on control and change the lights in a timely manner not only when they have already burned out, and then when the process of their darkening has begun, which is accompanied by a decrease in light output. Good luck on all roads.
356
