The textile design of the window is quite complicated, because it is necessary to choose a color and drawing, a suitable style, buy fabric and sew. Now the stores offer a large number of beautiful fittings and decor elements that will help to make a real work of art from the usual model.
Right measurements for sewing curtains
For sewing you need to perform the following actions:
- To begin with, accurately calculate the flow rate. After all, if a minimum inaccuracy was allowed when measuring, it will give a significant error. As a result, the curtain will be short or, on the contrary, it will be lying on the floor. To do this, you will need to learn the height of the curtains, as well as the width of the window opening. Much depends on the position of the curtains in relation to the floor. If various pickups or garters are used, then it is necessary to take into account.
- It is also important to choose a cornice, and what the location of the curtains on it will be. When mounting on the top level of the braid to height from the lower level and to the floor it is necessary to add a pair of sublimation. When attached to the lower level, it is necessary to add from 1 to 10 centimeters depending on the width of the braid for the curtains.
- Measurements of the width of the product and the entire fabric consumption depends on the nature of the folds that are sewn or adjustable by tightening the cords on the bracket. Proper formation of folds is carried out taking into account different coefficients. In the coefficient 2, the amount of tissue and organza should be increased by 2 times the cornice length.
Treatment of edges curtains
- It is necessary to decide in advance how the edges will be treated: the role-rolled seam, in the bending or oblique baker. Calculate the amount of oblique bay and tape. The latter can be collected differently, so it must be considered.
- If the curtain has a width of 200 cm, then the tapes will need 300 cm with a coefficient of 1.5. Fabric with a pattern or pattern will make it easier to adjust the sides on the sides.
- If there is no drawing, then it will be much more complicated to align the cut edge. For this you need to purchase a fabric with a margin.
- To check the absence of distillation, it is necessary to make an abscess with scissors and tear off the length.
- For other fabrics, it is better to align cut with scissors, placing the material on the floor.
- Before sewing curtains, it is necessary to verify the perpendicular arrangement of the side of the floor to the floor line or the ceiling.
Experience in SWOGA sewing, Labreken
It is better not to start sewing curtains that have complex models. First you need to sew the usual curtain with a properly sewn tape and precisely calculated consumption. For beautiful edges, a certain skill of processing "in the bending" or oblique baker will be required. First you need to run the edge edge edge and lease with thread. In this case, much depends on the quality of the fabric, the values \u200b\u200bof the Swag and from other secrets.
Adjusting a sewing machine
For sewing, the curtains will need knowledge of the technological features of the fabric and characteristics of the sewing machine:
- First you need to install a new needle, because thick and stupid will leave punctures or tightening. Threads need to choose thin, durable and elastic.
- It is important to adjust the tension of the upper and lower thread, the pressure of the paws so that the fabric is not going to go during sewing. For cloth and damage fabrics, you need to highly raise the cloves of the rail, if the fabric is thin, they need to be lowered to the maximum. Upon non-fulfillment of the seam conditions, it may not turn it out and smooth it out.
- To reduce the planting of the fabric, it is impossible to pull the scope of hand, because because of this, a needle can break or stretch the edge of the product. To avoid a strong landing, you can slightly pull the edge with two hands.
It is not recommended to make a small stitch, because it will not affect their fortress. And in the case of dissolved, it will take a lot of time.
Accurate cut curtains
Before proceeding with the processing of edges and sewing braid, it is recommended to make a sketch of the patterns of the curtains with the measurements of the canvas. After that, align all sides of the fabric. When counting the length and width of the product, it is necessary to add 10 cm for the subhead at the bottom and 2 cm for the vertex to the place of adjustment of the tape. The processing of sides implies an increase to a working width of 2 cm.
Chic curtains are the completion of the design of any interior. With their help, the room acquires a new appearance. Curtains are pieces of fabrics that can turn into skillful hands into elegant and beautiful. But for each person, their cost is high enough, so you can sew them yourself.
351
