How to drain the oil?

With the replacement of oil in the car, absolutely every driver is facing. Mix the oil is necessary in two cases: planned replacement of waste oil or excess of the oil level. With the last problem facing more often beginners, as they cannot correctly calculate the proportions and pour oil exactly to the laid mark. If you are faced with the problem of draining automotive oil, then the driver has two outputs: go to a hundred or merge, and also change the oil yourself. Make it just enough if you have step-by-step instructions.

1

How to choose a motor oil for a car?

If you merge the oil for its further replacement, then it is necessary to familiarize yourself with the main criteria for selecting lubricant material. After all, the oil for the car, it's like blood for a person. It is at the expense of this fluid that the engine is working properly.

• you need to know exactly what oil must be pouring into the car (if you previously made the oil change to the service station, then you need to ask what its brand and classification);
• buy oil from official dealers (good oil can be bought on a service station or filling station);
• do not take care of the exhaust oil and in dubious car markets (it is in markets that most often sell falsifications);
• remember that the viscosity of the oil is not always a good quality indicator;
• oil must be purchased depending on the car's mileage and season.

2

Tools that are needed with independent oil plum

If you decide to merge or replace oil yourself, then you will need a minimum set of tools that can be found in any garage of the car enthusiast:

• funnel;
• wrench;
• capacity to merge the exhaust oil (a bucket or pallet of the middle depth is perfect);
• jack;
• newspapers and rags;
• oil filter (if we drag oil to replace it);
• the keys for the oil filter.

If you merge the oil to replace the exhaust oil to a new one, then it is necessary to change the oil filter.

3

Step-by-step oil plums before it is replaced

Before starting to merge the oil, be sure to prepare the workplace. Under the container in which you will merge liquid, put the newspaper. Since the oil stain will be difficult to remove.

• get the car and let him work 2 minutes (you can also ride a bit down the street);
• with the help of a jack, raise the car (remember that it is impossible to climb under the car, which only jack holds, you must additionally use the lifting support);
• under the machine, find the pallet of the crankcase and the plug hole plug (where they are, you need to watch in advance in the instruction manual of your car);
• weaken the plug hole with a key (unscrewed counterclockwise);
• very carefully pull the plug, we substitute the funnel and we give the oil to the container (this stage is the most dangerous, since the oil can be hot);
• when the oil is glass (will drop the drops with a small periodicity), tighten the cork back.

4

How to merge extra oil?

If you poured the oil, above the maximum mark, then it must be merged. Since the excess fluid contributes to the wrong operation of the oil. In order to remove the oil, suction is required. It can be done independently. This will require:

• syringe with large volume;
• system for dropper.

Now go to the elimination of excess oil:

• we leave from the dropper only a long tube (everything else to trim);
• we dress the tube on the syringe;
• we find under the hood oily probe and insert homemade suction;
• we recruit the oil into the syringe and drain into the pre-prepared liquid;
• the procedure is repeated while the oil does not fall to the allowed mark.

During the oil drain procedure, follow safety. Worked oil must be disposed of. Many hundred make it free.