How to make a bootable USB flash drive 10?

How to make a bootable USB flash drive 10?

Installing and reinstalling the operating system is not without using the compact media of the Windows installation program. Today, one of the most sought-after portable storage devices are flash drives. How to turn the usual USB media to the mounting flash drive - read further.



1
Creating a bootable USB flash drive - USB-carrier requirements

  • The drive should not contain any other information.
  • Its size should be more than 4 GB.
  • Before starting the installation, the drive should be formatted:
  1. Insert the removable media into the USB connector.
  2. Using the conductor, find a removable media.
  3. By clicking on it with the right key, select Formatting in the extension FAT32.




2
Algorithm for creating a Windows 10 installer - basic version

  • Connect the USB carrier to the PC.
  • Load the software to your PC. To do this, go to the official Windows page and click the "download tool now" key.
  • Run just the downloaded program and accept the terms of the agreement.

  • In the window that appears, mark the installation of the installation media for another device and click "Next".

  • Fill in the following fields - OS language (Russian), its version (Windows 10) and bit. The choice of option for the last parameter depends on the technical characteristics of the processor of that device on which the OS will be installed.

  • T. K. The utility will be recorded on the flash drive, during the next step choose the first option - the USB device. In this case, you will automatically record the image of the boot disk on the USB flash drive. The "ISO file" version will save according to the specified PC address for further transfer to removable media.

  • We prescribe the path to the removable device to which the software will be recorded. A string that informs about the recording stage of the utility will appear.

  • To complete this process, for some time you have to wait. When the record is completed, you will have a flash media with the modern 10th Windows. The recorded software can be used not only for the first boot, but also to reinstall the OS in case of failure.

3
Algorithm for creating a Windows 10 installer - use additional programs

A popular application that helps implement this algorithm is RUFUS.

  • Insert a prepared USB carrier in the PC.
  • Download and download the RUFUS application.
  • In the device description column, you will prescribe the name of the flash carrier, which will be transformed into the installation.
  • If you are confident in the presence of UEFI support on your PC, select the corresponding option in the section of the section schemes - "GPT". If a device with a conventional BIOS, stop at the "MBR" option.
  • Next, fill out the formatting parameters. Put the "bird" opposite the fields:
  1. Fast formatting.
  2. Disk formation for download - "ISO image".
  • Next click the icon with a disk picture and prescribe the "address" of the image of Windows 10.
  • As a method of installation, mark the standard option.
  • Run the process by pressing the "Start" key.


4
Algorithm for creating a Windows 10 installer without third-party utilities

Prepare a USB drive that has been formatting.

  • Create an ISO image for your OS (for example, using the Official Windows Portal).
  • Unzip the file containing the system image, and copy its contents to the USB carrier.


5
Algorithm for creating a Windows installer

To implement this algorithm, it is necessary that the maternal board of the device on which the boot drive will be used, supported EFI-loading (had a new version of the BIOS).

  • Install the removable USB media into the connector of the same name.
  • Run the restart device (through the Start block item).
  • Once the screen is walked, and the restart process will begin by systematically pressing the "Delete" key in the BIOS.

  • Using hot key prompts (at the bottom of the screen), go to the downloads section ("Boot").
  • Change the order of processes when starting a PC. On the first place set the flash drive. Please note that the additive "UEFI" passes before USB. If there is no one - this method does not suit you.

  • Next, save the adjusted adjustments and start the start of the PC. Installation of the OS.



Add a comment

Your e-mail will not be published. Mandatory fields are marked *


close


загрузка