How to make the gate with your own hands. We make swing gates with your own hands. Step-by-step instructions for making swing gates with their own hands. Nuances and important moments.

In this article we will try to tell how the swollen gates are made with their own hands. You will understand that there is nothing complicated. In the production of sash, the most difficult thing is to cook the frame. If you do not know how to use welding, then press the welder for a couple of hours.

1
How to make the gate with your own hands - the choice of materials

The gate can be made of wood or metal. Please note the decorative gate yourself with curved lines with the use of forging you can hardly succeed, it is only a professional. For the manufacture of decorative gates, equipped, special room, an expensive tool and of course, experience. Such gates are better to buy ready. The home master will be wiserfully to make the usual gate with a metal frame, trimmed by profiled sheets.

2
How to make the gate with your own hands - mounting supports

If the yard is already fenced with the fence with the support pillars and the gate, then it greatly simplifies the case. Fix the loops with welding directly on them. If there are no supports, then you need to perform a number of simple actions.

Treat metal supports primer and open their paint.
Depending on the width of the gate, you need to dig 2 pits with a depth of 1.5 meters.
Arrange on the bottom of the pit pillow from sand and crushed stone.
Insert the supports into the pits and fix their reinforcement.
Align the supports on a plunder and fill with concrete.

The loops can only be installed after complete solidification of concrete.

3
How to make the gate with your own hands - Rama for the gate

To make the right frame, you need to prepare a drawing of the metal structure in advance and at this stage adhere to a certain sequence of actions.

In accordance with the required dimensions specified in the drawing, make a metal pipe strictly under an angle of 45 degrees.
The frame must be collected on a flat horizontal surface and immediately stick with welding.
Check internal sizes and compare the diagonal of the resulting frame.
Make the necessary adjustments and the focus frame finally.
In that sash, where the wicket is not provided, we weld from the inside a few corners for amplification.
In the second sash, collect a special opening, in which the door of the wicket will be fixed.
Having finished the preparation of the doorway for the door, collect the door. By prepared sizes, collect the framework of the wicket of a strictly rectangular shape.
The rigidity of the door wicket should be at the same level as the ribs on the sash.
To give the design additional rigidity, weld metal triangles in the corners.
We weld to frame 2 crossings.
According to the drawing, weld to the necessary places of canopies and drowsy.
Elements after welding are grouped and ground.
Color design.

4
How to make the gate with your own hands - frame professional flooring

After the frame is driving, you can bite the framework of the frame professional flooring. Lay the profiled sheet on the frame and take carelessly with rivets or screws. Using rivets allows you to get an attractive appearance.

Rivets and self-tapping screws need to be attached to the deepening of the professional flooring. Consumption: 1 square meter of professional flooring need to use at least 6 rivets or screws. This amount is associated with the fact that in addition to the weight of the gate, they must withstand a strong wind load. After fixing sheets profliver You can proceed to hanging the gate on the loop.

5
How to make the gate with your own hands - installation nuances

Before installing the swing gate, you need to make sure in the evenness of the earth coating. Since most of the masters make the gate that can open in both directions, then consider the goal opening "from ourselves" open more convenient and serve longer. Such a gate is difficult to hack from the street, because there is more strength against the opening directions than on the direction "along the goal. This is important, because in critical situations every minute the road.

Independent manufacture of gates from profliver - This is a reliable and economical way to protect your plot. He has other people's eyes and unreasonable guests. All this system can be automated, which will improve the practicality and functionality of the use of the gate. For this, automated equipment is used.