Permanent access to water is one of the facilities, without which a person is not thinking. And moving the city or even just visiting the cottage, it is very difficult to abandon this essential part of everyday comfort. Even if it is not possible to connect to water communication, you should not despair. At this time, time to drill a well and spend water from it to the house does not make problems, although it is a monetary process.
How to spend water in the house
As in any labor-intensive and expensive project, it is necessary to start with the knowledge of basic information. It is necessary to observe the scale to have a clear idea of \u200b\u200bthe number of necessary materials and possible future complications at the initial stage. 
How to spend water from a well to the house - communication scheme
It is necessary to compile a scheme of future communication in which will clearly indicate:
- pump for the fence of water (running to it electrocabolic),
- collectors,
- armature - the pipes themselves,
- place of issuing water (cranes, showers),
- laying pipes inside the building.
How to spend water from a well to house - Types of pipe gasket
Determine the type of pipe laying:
- Another option is a collector. It does not have significant pressure losses, due to the connection of the cranes directly to the collector. This will significantly increase the cost of communication. But it will simplify the process of use and sometimes nerves will save during the repair of the pipeline.
- If in the house there will be several water consumption points, and they will not often use simultaneously, then it is worth using a serial type of pipe gasket. This is a cheapest option with a disadvantage in the form of a pressure drop when using in several places of water issuing at a time. It looks like this: a tee is thrown from the central pipeline, connected to the mixer or other place of issuing.
How to spend water from a well to the house - Connection diagram
Well - pump + filter, if possible, using check valve - collector, hydroaccumulator for pressure control - Tee and shut-off valve - filtration section - Exit to the valve or to boiler. 
How to spend water from the well to the house - material for pipes
Now you need to choose a material for future pipes. Before choosing the material it is worth a detailed to study the possible options, and also do not forget that the cost of the water supply will directly depend on the number of pipes and additional tools, materials.
- The most popular - polypropylene, easy to use, reliable, serves until half a century, does not oxidize, the lung in the compound, the only thing - you will need a special cutter, but it is pretty Döshev.
- Metalplastic, often aluminum pipes, outside and inside the protective layer coated. Not subject to corrosion and mineral sediments. Sun is protected, but if necessary, flexions will need fittings. It is also impossible to use it if the water temperature is higher than 95C, and when the water freezing is high, there is a high chance that burst.
- Iron - pipes from it are very reliable, but require constant operation, and outside, and inside corrosion. For installation, either welding, or cutting threads.
- Copper, perhaps, the best that can be chosen for the pipeline, but for high costs, is not always possible. It has excellent heat-conducting results, is not affected by ultraviolet and aggressive biological environment. It does not fear corrosion, temperature jumps, chemical influence.
How to spend water from the well to the house - Mounting Communication
- First of all, it is necessary to determine the degree of primerization of the soil. If there is no such possibility, pave pipes at a depth of 60 cm + flood the pipe insulation, which does not absorb moisture and does not give in to a strong pressure seal (clamzit, foam crumb). It is also possible to use special thermal insulation, and then the depth of the trench can be reduced to 30 cm.
- Trench to the house you need to dig at right angles to avoid the seeding of the soil near the foundation.
- Drop the pit, the ground to the depth 1 m and sizes of 70 cm for 70 cm near the well. Strengthen the walls with brick or shelter boards, at the same time sprinkling the floor with rubble. Install the pump in it.
- To remove the water pipe, as well as the power grid (with a waterproof outlet) and the pump hose. Also stands to insulate this place to prevent water freezing.
- Locate the water treatment knot on the street. If there is an opportunity, the column, but given its price, the node is enough.
The conclusion is quite simple, there are no hopeless situations. Even in the outback, a person can feel free. It is worth only to show diligence, supported by theoretical knowledge. And also do not forget about consultations from specialists that even a country house provided the entire spectrum of comfort.
357
