Failures in the work of the Xbox 360 can lead its owner to the idea of \u200b\u200binterference in the internal processes of the device. The firmware of technology will help - the process is multi-step and responsible. Many prefer to entrust this work to the master, but you can completely do without it. We will need special knowledge, preliminary familiarization with the upcoming work and the ability to clean the screwdriver.
What do you need to know, starting the firmware?
Before proceeding with the process, you should know that unauthorized interference in the work of the device will deprive the opportunity to serve it under warranty. If the time of free repair has already passed, you can safely begin to firmware Xbox 360.
Another "but" - there is no one hundred percent guarantee that after such a manipulation, the prefix "will come to feel." It may turn out that she will stop working at all. Such a risk is always, even if the work will be performed by an experienced specialist.
So that the procedure is successful, the user must understand the terms characteristic of this field. Without them, it is impossible to delve into the written in the instructions, which means you can allow a fatal error and deduce the device.
Also, the process can be modified if:
- the very old firmware is installed;
- the firmware is not factory and has already changed earlier.
In this case, the risk of failure increases significantly, therefore it is better to seek help in a specialized computer workshop.
Firmware Procedure: Phased Instructions
First of all, you need to decide on the firmware version. There will be knowledge about the drive model. This will require a device parsing.
On the case you can detect information:
- manufacturer;
- model.
At the same time, it does not have to get the drive, which will delight the masters and save from unnecessary work.
- The next step is to search for the desired firmware on the network. You should also immediately download the Jungle Flasher utility. With it, and will be firmware.
- Now you need to de-energize the technique and eliminate the cover from the system unit. It is necessary that connecting the DVD drive and motherboard. Here will be by the way SATA - cable. In the same way, you should connect the video - cable and power cable. Now you need to enable devices.
- The next item involves the opening of the Jungle Flasher utility.
The user should perform a number of manipulations:
- select DVDKey - 32 I / O Port field, where you need to select the device drive. Information will be displayed in Drive Properties;
- click on LO83INFO to read the key;
- open the drive tray, hold, click on the closing button;
- pull the white power plug from the drive;
- from this plug, disconnect another wire;
- pull the tray half and turn on the white plug, leaving another wire disconnected;
- turn on the device;
- in the Jungle Flasher utility window, click "OK";
- pull out the drive tray to the end, not turning off the power, and then again "OK";
- the system considers the key, it should be saved;
- connect the third wire.
This procedure requires maximum attention and accuracy. The slightest inaccuracy and prefix will turn into a non-working box.
When the key is saved, and the firmware is downloaded, you can start the final stage - the firmware itself.
In the Jungle Flasher, click on Firmware Tool 32, and after - Open Source Firmware. Select file - key.
The screen appears to load the firmware. You need to select "No", find the downloaded option thanks to the Open Target Firmware key.
Then follow the transition to the program tabs, namely:
- Spoof Source to Target, Save data in it.
- MTKFlash 32 - Lite - ON ERASE.
- A message appears on the screen - the question is whether the user is confident in the selected key. Need to confirm by clicking "Yes."
- When the next window appears - a warning, you need to turn off and immediately turn on the device.
- Then you need to press "Yes" again, and then - Write.
As a result, you need to click on Outro / ATA Reset.
Is the correct firmware?
An important step is the firmware check procedure. It is possible that the accurate version will be defective, and the prefix will remain unequiscover.
What to check should be inserted in the Xbox 360 disk with the game specifically for this version of the firmware. If its download occurred without problems, then you downloaded the correct version.
If the game does not boot, then you need to look for a new firmware and resort to the algorithm again.
The Xbox 360 firmware procedure cannot be called easy, but this is done if there are skills of such work, knowledge of specific terminology and a little adventurism.
357
