How to sew collar?

How to sew a collar correctly? After all, this detail of the clothes is the "face" of the product that should lie smoothly and look beautiful. Depending on the type of fabric and style, the product has its own rules for working with a collar. Some of them will consider below.

1

Primary requirements

Before you start working on a collar litter, we advise you to run through the basic rules and requirements.

1. The neckline of the neck and the collar itself must be identical in size.
2. According to the standard - the collar is made from two patterns (top and bottom). They lie according to the same standards.
3. In order for the collar nicely lying and not sharpened, the upper pattern (top of the collar) should be made slightly more than the lower part of the product.
4. Depending on the product tissue, the size of the top of the collar changes. So, thick fabric involves a greater retreat than thin.

2

Easy way to sew collar

This method is the main for the sewing of flat collar. The main task is to attach the finished collar between the neckline and the hints. If you need to sew a pending collar, then this method is suitable only if the thing is made of fine and light fabric. Initially, the main part of the thing should be prepared:

• stack and spend the shoulder cuts;
• shoot the bar.

Start the collar tissue tab should be with a throat seam, after the collar in the neck is needed. Do not forget that the lower collar must be below. Pins fix the collar, firm on the typewriter and remove the pins.

3

How to sew a collar on a men's shirt?

If a men's shirt provides a collar in a collar with a single-circuit rack, such actions should be performed:

• Folded together face to face the lower part of the finished collar with a neck inside.
• Straighten and combine all previously supplied marks of the shoulder beverages and the center of the neck, the rear of the shirt.
• Sew two details with each other. For such work, the step of the sewing machine is set by 0.7-1 cm.
• Next, it is necessary to subjected to the edge by 0.8 cm and it is necessary to start or pinch the pins.
• Shoot the collar is slightly higher (up to 0.2 cm) from the fold.

If the collar has a cutting rack, then it is originally attached to the collar, and after the stages of the work described above are repeated.

4

The sewing of the collar by the octopic seam

To sew a collar of the covo, it is necessary to apply a part of the collar billet on the facial part of the neck, and the collar must be located 3-5 cm above the end of the neck. Place the connection bend inside, protruding 5 cm wrapped under the folding strip. Fix and strain from the edge of the bend at a distance of 0.1 cm

5

How to sew a single collar?

In the neck of the same collar in two ways:

1. The first provides for the use of bakery. The collar is applied to the edge of the neck, bend and attaching a single-layer or double fairy, set it from above and below.
2. The second method is based on the use of the calculation. The collar is connected to the neck, and how in the first case is bent. Over the imposition is superimposed, which is fixed with two lines from above and below, retreating 0.1 cm from the edges of the beach.

Before you choose how to sew a collar, rate the tissue density, proceed and encircle the product. If everything is in order, then safely admonish the collar.