How to use a sewing machine. Instructions for using a sewing machine. Step-by-step instructions for the preparation of a sewing machine to work. Sitty for the machine for the first time.

If a sewing machine appeared in your house, then you can create a real masterpiece at any time: sundress, fashionable skirt, dress or carnival costume. Of course, only the presence of the machine is not enough for you, you still have to use it.

1
How to use a sewing machine - placement of sewing machine

Install the sewing machine on a special stand, a writing desk or any other workplace. Put it so that the needle is located to the left of you. Do not connect the typewriter at this stage - you need to check several more parameters.

2
How to use a sewing machine - insert the needle

The needle has a flat side, so it is inserted only in one way: you need to turn back the flat side. On the other hand there is a groove directed towards the passage of the thread. Insert the needle and tighten the screw well that holds it.

3
How to use a sewing machine - installation of the coil

The sewing machines use 2 sources of filament: upper and lower. Nizhny is located on the coil. To wind the thread, install the coil into the upper coil. To wind the threads from the nietary coil, swipe it on the bobbing through the pitch. Turn on the coolant mechanism and wait until it stops. When the spool is ready, install it at the bottom of the machine, under the needle. Leave the end of the thread outside, you need to insert it in the needle.

4
How to use a sewing machine - refuel the thread

A coil with a thread that is located at the top of the machine must be promoted and attached to the needle. To do this, take the free end of the thread and stretch through the pylochyrity, located at the top of the sewing machine and lower it to the foot. Each sewing machine is drawn with small numbered arrows indicating the order of manipulation with the thread.

5
How to use a sewing machine - inclusion

Most sewing machines are equipped with built-in lighting. Thanks to him you can understand whether there is electricity in it. The power button, if there is, is located on the reverse side of the machine. There are models in which this button is missing, they work immediately after connecting to the network. Connect the pedal.

6
How to use a sewing machine - learn to sew

Before starting to sew something on your new typewriter, you need to adjust the speed, learn how to turn on and stop the device.

Select the operation mode of the "hull move" machine.
Long tap on the start-up pedal with foot and bring the device in motion.
Press the pedal more stronger - the sewing speed will increase.
If you remove the leg with the pedal, the machine will stop sewing.

Repeat the listed actions several times. Now you can try to start working.

Prepare a fabric: fold it twice, go on the sleeves. Now with the help of chalk, spend various curves and broken lines.
Install the machine to workplace and prepare it to work.
Stretch the fabric on the marked lines.

7
What can I do

Do not use blunt needles. If you hear a deaf knock in the process - then the needle fucked and need to be replaced.
In no case do not include computerized machines immediately after they are on the street or in a cold room. In this case, it should be held at room temperature about 2 hours.
Do not use lamp, transformer or sunflower oil to lubricate the machine.
The rotation of the flywheel in the opposite direction will necessarily lead to the confusion of threads in the shoon. You will have to spend a lot of time to unwind.
It is impossible to turn the fabric with a raised needle. This is hello not only to the displacement of the line, but also to the confusion of threads in the shoon.
If the thread is confused, it cannot be kept. Do not reject it, but in smoothly pull, turning the flywheel.
Do not slow down and do not pull the cloth at sewing. It must move with its own way, otherwise the needle breakdown is possible.

So that the sewing machine served for many years, it is necessary to care for it and at the same time to operate correctly. Consider the basic rules for care:

Keep the machine in a cool dry place. The mechanism can be spoiled under the influence of dampness.
Whether the device from dust contacts. It contributes to the tight move and solidification of oil.
If you did not use the machine for a long time, then it needs to be cleaned of dust and handle all the rubbing nodes.
After a long dope, always replace the needle to the new one. The fact is that it can be covered with rust and constantly tear thread.