How to connect a digital console to the TV

How to connect a digital console to the TV

Analog television has been confidently replaced by digital. With him you can cover a wide range of favorite channels, to receive a signal much faster and more clear. Now you can forget about interference on the air, deterioration in the quality of the picture from the weather and other external conditions. It is enough to purchase a special antenna and a digital console, which is otherwise called the receiver. Sometimes you can do without it, however, such a case is quite rare.



1
What you need to connect the digital console to the TV

First of all, you need to decide whether there is a built-in digital tuner in your TV. This device turns the antenna signals into clear TV. Otherwise, you will need the receiver of the installed DVB-T2, which will recode the signal from the antenna and send it further into the TV.

Modern receivers have a practically a complete set of outputs, so you will definitely beat the cable to your TV.

  • The most frequent cable is called HDMI. It provides fast gear and high quality picture. Sometimes an analog output is connected to it in addition to it so that the analog channels can be viewed;
  • After HDMI, the most popular and acceptable in quality is the DV output. It has a rounded shape, so you will easily notice it;
  • It is already much worse to connect the receiver through the RCA connector, as the picture quality drops;
  • The latter can be called SCART type output.



2
How to connect a digital console to TV via HDMI

Modern TVs are plug-in with HDMI connectors, as they remain the most advanced today. You can watch high quality television, as well as you do not even doubt the image on the screen.

Connector itself is quite difficult to confuse: it is flat, as a rule, is located horizontally. On him you will see the signature "HDMI". At the edges, the connector becomes sharply below.

Connection occurs through the receiver. First you connect the wire from the antenna into it, and then stretch the HDMI from the receiver to the TV. As a rule, the names of the inputs and outputs are always indicated on the receiver, and they are clearly distinguishes on the TV panel.

After that, locate the HDMI TV output on TV and search channels. Automatic tuning will finish everything for you.

3
How to connect a digital console to TV via DV

The DV connector has a fairly flat input, but a square shape, so it is also not so confused. Carefully look at the cable and connect it to the TV.

The remaining actions remain exactly the same: you need to connect an antenna via the receiver to the correct entry of the TV.

4
How to connect a digital console to TV via RCA

Do not confuse the RCA cable with HDMI, since inexperienced users can easily make a mistake in the choice. If the cable is not included in the connector, then you need to flip it, if it does not come in - in no case make efforts. So easy to break or completely break the connector on a TV or a digital console.

Despite the name of the cable - RCA, you need an entrance to the TV with another name "AV". It is in him you can place the plug.

The rest of the setting occurs by analogy with previous points.

5
How to connect a digital console to a TV via SCART

This cable can be attributed to many well-known Tulip type. The console itself includes only one plug, and in the TV - three more. Remember that each plug is placed in the connector with exactly the same color.

SCART One of the obsolete species currently transmits the worst picture quality and is very inferior to the rest of the connection.

In addition to the foregoing methods, there is another method - when there is already a built-in digital signal reception adapter. So far, there are few such plasma panels, but they are actively included in everyday life. If you have such a TV, then the receiver is not needed. Just connect the antenna directly to TV.

Comments leave a comment
Maria 20/11/2018 at 13:28.

who will say what kind of cable is compatible (RSA)

To answer

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close