What does it mean to seize the counter? How to do it and who should do this, we will look at our article on the example of the water meter.
What is the partition of the counter and when should it be done?
Put a seal on the meter on water - means put it not to the device itself, but at the place of its mounting with the water supply.
Severed counter is necessary when:
- You do the installation counter
- You change the meter as a result of breakdown or replace it
- You repair the pipeline and change part of the pipe where the counter is set.
- If you damaged the old seal
It is not necessary to change seals on all meters when buying a house, it is enough to simply check their presence and integrity. But if you think you need, you can do it.
Who puts the seal to the counter?
To put a seal on the counter, you must contact the company - Water supplier. The employee of this enterprise must complete the counterpart. You can also contact the firm that performs the installation and sealing of meters. If you select a private firm service, then you must make sure that they have a relevant license. The employee in a short time must complete the counterpart, and also make an act and give it to you. As for the price, the cost of one seal will be from 400 rubles. If you have two meter in the apartment, then we will require payment for two seals.
How to properly make a sealing meter?
Installing a seal to the counter must be made after installing the meter itself. But if you change the seal because of the breakdown in the water supply system, then for the beginning you must eliminate this problem, and already begin sealing. Prepare your passport on the meter and the installation act and provide them to the master who will deal with the sealing counters. Also, according to the legislation of the Russian Federation, you must install filters on counters. Next, you send a notification to the municipal office with a request to put a seal on the accounting device.
In the text of the letter, specify:
- Your name, address of accommodation, passport details, phone
- Date when you plan to enter commissioning
- Counter type, number
- Act of installation
- Information about the enterprise that completed the installation
- Meter readings (if not new)
- Copy of the passport on the counter
- Date next check
After your letter is received, the inspector will check the counter and all relevant documents on it will put the seal and gives you an act of installing a seal, will leave the copy. Your signature and signature of a person who installed a seal should be appropriate on the act. Check that the seal number is specified in the act.
Feeding the counter is done to protect the service provider from dishonest consumers of these services. In other words, to prevent the "opening" of the testimony. What to avoid fines make the sealing of your counters correctly and on time.
356
