Electronic clock - a stylish and practical accessory for daily use. The easiest way to configure them is usually contained in the instructions that have been attached to the device when buying. If it is missing, the documentation can be searching on the manufacturer's official website, or use our recommendations set forth below.
How to set up an electronic clock - buttons
In this case, under the electronic clock, we will mean a device equipped with an LCD display that can work with a programmable data display. For example, consider the clock from the popular Casio brand, known worldwide. Almost all electronic devices of this sample are controlled by buttons whose work is to devote a separate paragraph. These elements can react to pressing:
- launching settings;
- regulators;
- on or disconnecting both the hours themselves and individual functions;
- reset the settings installed earlier.
Configuration It is easy to run a one-time or reusable by pressing one or more buttons simultaneously, with a sequential click or "drowning" with a delay. Pressing with hold is just typical for Casio electronic hours, opening a list of settings. Next, you can choose time, time zone, date, timer, beep and so on. The duration of clicking is capable of fluctuating from 2 to 7 seconds, depending on the model. The same principle concerns the button to turn on the backlight.
How to set up an electronic clock - electronic clock functions on the example of Casio DW-6900
This accessory is equipped with one facial and four end buttons. Among them:
- ADJUST (responsible for the entrance to the mood and is located on the left, recessed);
- MODE (changes the modes, placed below the left, the remaining buttons protruding);
- Split / Reset (performs respectively the "separation" and "reset" function, is on top of the right);
- START / STOP (starts the "Start" or "Reset" functions, for example for a timer, is on the right below);
- Light (bottom, frontal button starting backlight).
The input to the general settings is not open from any menu, but only from the current time mode (in fact, the most "conventional" status of hours, with the display of time, dates and other service icons). When the Adjust button is pressed, we wait for the fiction of the second digits and begin the setting by changing the values \u200b\u200bby the buttons described above.
How to set up an e-watch - setting time
To understand the practice of managing an electronic clock, consider the process of change of time, for convenience, denoting the left upper button of the letter A, the right upper - in, the left lower - C, the right lower - D. Next:
- Hold and before flashing seconds.
- Click with several times to choose summer time, hour, minute, etc.
- When the desired value flashes, it is ready to adjust.
- Press D to reset the counter to zero if the current values \u200b\u200bare between the numbers 30-59. It may be so - with the values \u200b\u200bfrom 0 to 29, the counter will not be reset, add or take away is manually.
- Single pressing D will lead to an increase in the number, to cause a decrease.
- When the correct value is set, click and to complete.
If the clock has conventional arrows, they should be automatically synchronized with electronic values. When it does not occur, press with and leafing with it to the function "H-S". We hold down long by pressing, waiting for the flashing of numbers with time, after which the D button set up the arrows. We maintain changes to the button A.
356
