Many families and almost all large or small businesses have their own printers. These machines can freely fit on the table or shelf, or may be so great that they need their own closet. Regardless of where it is or for what purpose it is used, each printer contains cartridges that provide a clear printing of documents, photos and other materials. Replacing ink cartridges may seem challenging for a regular user. This manual will show step by step the entire process of removing and disposing of old cartridges and installation of new, and will also offer some ways to increase the durability of new ink containers. Each brand of the inkjet printer is slightly different from each other, but their main replacement steps are similar.
How to get a printer cartridge - when replacement is required
The printer indicates a low margin ink long before they completely disappear. The user can notice that the cartridge is almost empty when the seal becomes dim or has accommodation. The quality of the document is worsening, while having passes of a part of letters or other characters.
How to get the cartridge from the printer - we define the brand
When the printer sends a notification that the level of the cartridge is low, the user must open the printer and record its brand and model number. You will need this information to find the right interchangeable cartridges. The model number is usually located on the back of the printer. If for some reason it is not possible to determine it, refer to the documentation of the device.
How to get the cartridge from the printer - fix the cartridges
Turn on the printer and open the cover that hides the cartridges. Their carriage should slide to the center of the print area. You may need to click the Ink button, which can have a drop icon in order for cartridges to come out. Do not pull the print head. It should exit automatically when the lid is open or the button is pressed.
How to get a cartridge from the printer - the correspondence of the number
Pay attention to the cartridge number and its type. The numbering and marking system depends on the manufacturers of printers.
How to get a printer cartridge - Right container
Buying a new cartridge instead of the old, pay attention to the numbers you recorded. Try to take the item in a proven store. If you are experiencing difficulty when choosing a model, ask for an employee to help you. Make sure you get cartridges from the correct manufacturer. Remember that a certain type of cartridge is incompatible between different stamps and often even within the similar brand.
How to get the cartridge from the printer - take out old cartridges
Gently remove empty cartridges. Depending on the printer model, you may have several slots. The color of the ink cartridge is displayed on its label. Grasp the cartridge. Some cartridges have clamps that must be pressed to release them from the ink tray. Remove it at the desired angle from the point of attachment. Do not remove old cartridges if you have no replacement. The left blank print head will quickly come out.
Shake the container
Shake the new cartridge in vigorously before unpacking to improve printing.
Remove the ribbon
Remove the protective tape from electrical contacts. Almost all models of cartridges have a protective tape or a piece of plastic to be removed before installation.
Installing a new cartridge in the printer
Insert the new cartridge in the reverse order of it. Stick up the right corner of the installation and apply a little effort. Most new cartridges are attached automatically with a slight pressure.
Test page
When you make sure the cartridge is properly installed, type the test page.
Adjust print
Adjust the printer head to get the best print quality. If you have noticed stripes, lines or stains, your head needs alignment and cleaning. Refer to the printer documents to find out how to do it for your model.
The knowledge gained and attentive attitude to your printer will help extend the service life of your device.
361
