How to get the cartridge from the printer

How to get the cartridge from the printer

Sooner or later, the paint ends in any printer. To return the device to print, the cartridge needs to be replaced or left. And for this, the latter must be removed. How to do it right - read further.



1
How to get the cartridge with paint from the printer?

Like many other tasks, nothing complicated in the coming business. The main caution is not to make extra effort so as not to damage the printer "filling". The easiest way to find out how the cartridge is retrieved from a particular model of a device available is to read the instructions attached to it when purchasing. You can also search the documentation on the official website (perhaps there it will even be available in Russian). If these ways, for various reasons, are not relevant, try to produce such a sequence of actions:

  • turn on the printer and wait until it starts completely;
  • raise the top cover;
  • just under it should be placed cartridges with paint (do not attempt to extract them until the print head stops);
  • according to the labeling on the surface, find the right color and pull the cartridge slightly;
  • when a specific click will be heard - this is the drop-down retainer, you can continue to extract;
  • if there was no sound, then the retainer must be found and opened manually;
  • carefully inspect the surface of the cartridge, somewhere near should be a small retractable lever;
  • move it into the opposite state and remove the cartridge with a smooth movement;
  • some models of printers are arranged as follows: the cartridge needs to be slightly pressed, until it clicks, after which the part will push in the opposite direction and it will be possible to remotely remove it;
  • the most rare case is the extraction of the entire printhead, followed by the cartridge compartment (it is recommended to resort if the previous methods did not help).

If you cannot remove the required part from the first time, try not to apply to the extract of the cartridge of physical effort, find out again and move the retainer. Look in the network instructions to your device model or contact the technical support service on the manufacturer's website. In the extreme case, the device can be attributed to the service center, where the cartridge will change without harm to the workability of the printer.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close