Hand knitting knitting needles

Knitting with spokes is an exciting and fascinating process, and the created products are obtained by exclusive and original. Thanks to the boilers, you can create a fashionable masterpiece for which you will need quite a bit of time and desire!

1
About a sweating viscosity

The handling compound is the most elementary and simple pattern of all kinds of knitting, it is from him that the needleless training begins. The handbook has a number of advantages and features, compared with other types of product creation:

The canvas turns out a double-sided, that is, the facial and the wrong side is absolutely identical. This feature is very convenient when knitting bilateral collars to the autumn coat, planks, or knitting scarf-clamp.
The drawing is slightly tightened by a vertical, creating some kind of harmonica of yarn, thanks to which winter things are still warmer and look more voluminous.
Ready work It turns out a soft and pleasant body, which allows the use of a handwriting when working on children's booties, blouses or scarves.
To learn how to a handful pattern, it is enough to know how facial loops are tied, which are used in the personal and in the involved row.
Also knitting allows you to create a product without peeping into the scheme, which is very convenient at the initial pores. For a detailed acquaintance with the pattern, check out the presented master class and training video below.

2
Steer knitting knitting needles - a set of loops

We start directly to work, for knitting we need the needles and fur hair. To make a neat and beautiful pattern on the product, pick the spokes of 4-4.5 mm. The thread for learning should be single and not very fluffy. The set of the initial row hinges will be made on one needle.

Make the right amount of threads, on the first 15 loops will need 15 cm yarn.
The first effect is to put the thread correctly, for this on your left hand, make the seizure of yarn by index finger, create a tension by throwing the thread onto the thumb. To hold the tangle, make the girth strands with three fingers (Fig. 1).
We perform a set of loops - the needle, spend under the thread and capture (Fig.2.3).
Then make the hooking straight near the index finger (Fig. 4).
Dive again under the thread near the thumb (Fig. 5)
After that, tighten the nodes with two fingers (Fig. 6). Type the required number of loops by this technique. Knitting spend light movements without tightening the loops too tight.

3
Steer knitting needles - facial loops

The loop has two walls, the front side is considered closer to you. The back is called the wall that fingers hold. When viscating facial loops, the first captures are performed from the front.

Take the right knitting needles - capture the part of the thread, which stretches from the tangle and squeeze it on the face of the mother's face. After that, grab the thread from the inside by transferring to the index finger, the thread tension should turn out. Put the needle on two fingers holding a big and middle. In such a position of the hands, the knitting of the product is performed (Fig. 1).
For the beautiful edge, the first loop is riveted on a simple removal (Fig. 2).
We carry out knitting - from under Niza, output the needle in the middle of the loop (Fig. 3).
Capture thread on the index finger (Fig.4)
Swipe the bottom of the bottom and return to the starting position.
After that you can remove the loop on the second knitting needle. (Fig. 5,6).
Check all loops to the end, fix the latter in the wrong way. After that, turn the job and register a number of facial loops. This way creates a knitted product with a handful viscous.